"Patches" for the heart will print on a 3D printer

Date:

2017-09-15 20:00:06

Views:

4009

Rating:

1Like 0Dislike

Share:

Source:

3D printing is widely used not only in industry but in other industries. For example, in medicine. There have been several attempts of printing entire organs. But if full use of printed organs is still far away, their parts can be produced in the near future. A researcher from the University of Saskatchewan (Canada) Mohammed Izadifar developed and already tested techniques of recovery of the heart by using 3D printing technologies.

The Scientist have already conducted a series of experiments on mice and was able to prove that three-dimensional printing allows you to create a kind of «patches» for the heart, restoring the body after injury. After implantation, «the patch» begins to grow and close the defect of the heart muscle. It is worth noting that in experiments on rodents Mohammed was faced with a very vexing problem: mouse heart has an extremely small size, and the affected area in this case is hardly visible. For successful observation, the researcher modified the method of x-ray imaging, developed at the research center Canadian Light Source (CLS). This method allows to observe the filaments of the cardiomyocytes, the distance between which is equal to 400 microns.

the Author, Dr. Mohammed Izadifar

For the experiments the doctor had chosen a natural hydrogel based on algae, which is completely biocompatible with the human body material. And if implantation does not occur the reaction of graft rejection. In addition, this hydrogel is biodegradable, and after the substitution region patches new cells he «resolved». In recognition of the scientist,

«the Problem of rehabilitation of patients after myocardial infarction is that the heart cannot repair itself after damage. My goal is to take stem cells of the patient, and then to receive from them the cells of the heart muscle».

Human Cells are placed in the environment of the hydrogel, and then transplanted to the patient. Over time, heart tissue begins to dissolve, gel, patch, and heart cells grow and replace the defect. Later, the new tissue begins to grow blood vessels. For «embed» heart cells and need to resort to the technology of 3D printing. This is the most difficult step in creating patches. As stressed by the author of the method

«In my research I use the stem cells to cardiac tissue. Using various three-dimensional patterns during printing it is possible to change the strength, agility and structure of the cells «patches» from the hydrogel. And due to the method of x-ray imaging, it is possible to completely control the healing process».

Recommended

The coronavirus has mutated into 30 new strains

The coronavirus has mutated into 30 new strains

While coronavirus Apocalypse slowly but inevitably becomes routine, the virus SARS-CoV-2 continues to evolve. And, unfortunately, he was good at it. Writes , with reference to the South China Morning Post reports that new studies show that the virus ...

In the United States recognized that the ventilator dies 88% of patients with coronavirus

In the United States recognized that the ventilator dies 88% of patients with coronavirus

When the world is raging coronavirus that causes pneumonia and kills people, the only solution is intensive care. If this is not done, the victims will be very much. Today for severe patients there is only one solution — connected to the appara...

Can a transfusion of blood plasma to cure the coronavirus?

Can a transfusion of blood plasma to cure the coronavirus?

Typically, vaccination involves the introduction into the organism of the weakened or killed microorganisms (viruses) designed to create a strong immunity to possible future infectious diseases — that is, for selection of antibodies. But what i...

Comments (0)

This article has no comment, be the first!

Add comment

Related News

For the first time grown living bone tissue

For the first time grown living bone tissue

for the First time in the modern history of transplantation, the scientists managed to grow the real bone tissue. These successes scientists from Scotland and Ireland. According to the journal Nature Biomedical Engineering, it may...

Printed on a 3D printer tibia implanted in the patient

Printed on a 3D printer tibia implanted in the patient

Experimental surgery helped 27-year-old Australian to save the leg. Reuben Lighter suffered from a serious form of osteomyelitis and he was threatened with amputation, but the doctors encouraged him to try a new method, previously...

How to make the medicines more effective?

How to make the medicines more effective?

One of the main problems of the effective action of drugs is that while they «travel» the body of the substances just destroyed our defense system. In addition, medications are often toxic and cause no little harm. Has l...

In the U.S. propose to use the Zeke virus to fight cancer

In the U.S. propose to use the Zeke virus to fight cancer

One of the main problems in the treatment of brain tumors is poor accessibility to medicines (because the brain is protected by blood-brain barrier), so for surgical intervention because of the danger of damaging vital centers. Bu...

Modern tests to determine cancer are not effective?

Modern tests to determine cancer are not effective?

Modern methods of diagnosis of this deadly disease as cancer are not informative enough. The disease is usually detected at a late stage. One of the most common ways to recognize cancer is the identification of tumor markers (if s...

Artificial intelligence will identify patients malingerers

Artificial intelligence will identify patients malingerers

many medications must be administered strictly under doctor's orders. With a long examination and prescription prescription to receiving medication. However, a number of pathologies such as pain, can be simulated and some people d...

New nanorobots to kill cancer cells in minutes

New nanorobots to kill cancer cells in minutes

an international group of scientists, consisting of three persons developed microscopic and «light on the rise» robots that can quickly and effectively destroy the cancer cells. The Verge reports that in the past year, r...

In USA approved treatment for cancer by using genetic engineering

In USA approved treatment for cancer by using genetic engineering

Gene therapy, despite the extreme promise in the deliverance of mankind from many diseases, finds a lot of enemies. But it's encouraging that even now, when this method is, in fact, in the beginning of his career, are those who ar...

Exoskeletons will allow to improve the mobility of children with cerebral palsy

Exoskeletons will allow to improve the mobility of children with cerebral palsy

cerebral palsy — it is a chronic non-progressive motor violation, usually resulting from lesions or anomalies in brain development in the perinatal period of fetal development. In the result of cerebral palsy usually suffer ...

100 diagnoses in 4.8 seconds: the usual routine of medical AI

100 diagnoses in 4.8 seconds: the usual routine of medical AI

the sooner the doctor put the diagnosis – the better for the patient. The speed and quality of diagnosis depends treatment and recovery time. But even the most skilled diagnostician can't compete with the Chinese "physician" under...

Is it possible to increase the chances of a successful mutation?

Is it possible to increase the chances of a successful mutation?

In 1944, a PhD student of genetics at Columbia University Evelyn Witkin has made the occasional mistake. During his first experiment in a laboratory in cold spring Harbor in new York, she accidentally exposed millions of e coli le...

Novosibirsk surgeons set patient two artificial heart

Novosibirsk surgeons set patient two artificial heart

transplantation of organs long enough to have saved dozens of lives. However, transplant surgeons over and over again do the impossible and carry out such surgical intervention, the mere mention of which is hard to fit in the head...

The Chinese patient was implanted printed on a 3D printer vertebrae

The Chinese patient was implanted printed on a 3D printer vertebrae

in the Spring of 28-year-old resident of Shanghai was diagnosed with chondrosarcoma, a bone cancer. In the survey it was decided to do the surgery, but the matter was complicated by a number of factors. However, Chinese experts ha...

Robot surgeon, who must eat

Robot surgeon, who must eat

When we hear «robotic surgeon», we probably imagine a huge machine «armed» scalpels. But soon the meaning may change radically. The fact that, according to an article published in the journal Science Translatio...

First grown pigs whose organs can be transplanted to a human

First grown pigs whose organs can be transplanted to a human

As you know, animals whose organs can be transplanted to a man almost without fear, are not our closest «relatives» apes, and pigs. The truth that transplant organs has a big drawback: the presence in pigs is extremely d...

Found a way to

Found a way to "reprogram" cells to treat diseases

for anybody not a secret that cells in our bodies have a "built-in" ability to confront various negative factors. But, unfortunately, not always this convenient feature allows you to fully "beat attack". Then come to the aid of va...

Developed a cure for cancer based on gold

Developed a cure for cancer based on gold

One of the most effective means of cancer treatment currently is chemotherapy. And for all its virtues it has a significant drawback: extremely high toxicity for the organism. But soon, as reported in the journal Angewandte Chemie...

In Germany may allow to treat the disease parasitic worms

In Germany may allow to treat the disease parasitic worms

According to some research (which the scientific community agrees), some diseases like allergies, type I diabetes, and several autoimmune processes can arise from the fact that the human body from childhood «well protected...

Created a biosensor that stimulates the secretion of sweat when the person is relaxed

Created a biosensor that stimulates the secretion of sweat when the person is relaxed

Relatively recently, scientists monitor the health of the human body, exploring the composition of its secretions . This led to the creation of a truly advanced biosensors that are able to extract from aqueous solution of salts of...

Augmented reality can now be implanted in the eye

Augmented reality can now be implanted in the eye

While Google thinks what to do next with your glasses Glass and Microsoft is trying to reduce the cost is incredibly expensive AR headset HoloLens, an American eye care company Omega Ophthalmics has developed a very interesting pl...