Elon Musk showed almost assembled booster, the Falcon Heavy


2017-12-20 14:15:04




1Like 0Dislike


Elon Musk showed almost assembled booster, the Falcon Heavy

Elon Musk pictures almost fully assembled booster, the Falcon Heavy, which is at the spaceport Cape Canaveral in Florida (USA). Now we have the first opportunity to look at how will look the final result of years of work of SpaceX.

Recall that the first launch of the rocket, the Falcon Heavy is scheduled for January 2018. The design of the rocket involves the use of two boosters, based on the first stage of the Falcon 9 Block 5. On top of the boosters placed composite protective cone. Each accelerator has 9 liquid-propellant rocket engine Merlin 1D, located on the scheme Octaweb, one Central engine and the other eight arranged in a circle around him.

When you run a Total of 27 Merlin 1D engines (center unit and side boosters) create the vehicle 22 819 kN at sea level and 24 681 kN in vacuum. It is planned that the carrier will be able to deliver to 63.8 tons into low reference orbit, to 26.7 tons into a geosynchronous transfer orbit, and 16.8 tons to Mars and 3.5 tonnes on Pluto.

The Falcon Heavy, and Falcon 9 will be equipped with elements of the system reusable for controlled return and soft landing as a Central unit, and boosters. Due to the fact that the first stage of the Falcon Heavy when undocking from the second stage will have much greater speed and be much farther from the launch pad, in comparison with the first stage of Falcon 9, the necessity of its return to the landing area will result in a significant reduction of the weight of the output load. Therefore, in the high-energy runs on a geotransfer orbit, it will undertake a landing on a floating platform. The side boosters, by contrast, will have the opportunity to return to the start place and landing on the ground when the vast majority of the startup scripts.


Comments (0)

This article has no comment, be the first!

Add comment

Related News

Manned spacecraft

Manned spacecraft "Soyuz MS-07" successfully delivered cosmonauts to the ISS

Manned spacecraft "Soyuz MS-07" successfully docked to the International space station — the press service of the «Roskosmos».

NASA tested the engine printed on a 3D printer

NASA tested the engine printed on a 3D printer

three-Dimensional printing is not only able to significantly reduce the cost of production, but also greatly facilitate the creation of many devices.

#photo of the day | Astronomers have shown that Mars

#photo of the day | Astronomers have shown that Mars "in full growth"

Scientists from the European space Agency has published a very unusual photo of Mars.